Hi guys,
Almost have the same problem, and still not able to solve it now [despite lots of search].
I used to have BitLocker working on my laptop, but I removed it before cloning [with Paragon] my SSD to a new and bigger one. When I replaced the SSD the system did not boot, and I had to create a new BCD store by copying UEFI boot files from the system
directory on fix the UEFI boot partition. When the boot problem was fixed, I used gParted to extend my C: partition and delete useless recovery partitons at the end of the drive. So actual partitioning is as follow [as per Diskpart]:
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Recovery 500 MB 1024 KB
Partition 2 System 300 MB 501 MB
Partition 3 Reserved 128 MB 801 MB
Partition 4 Primary 930 GB 929 MB
So I guess I made something wrong when I tried to repair the UEFI boot partition... Well, now it boots correctly, but I can't enable BitLocker anymore and get the not-so-explicit "The system cannot find the file specified" error you had. Here is
what I get with a "bcdedit.exe /enum ALL":
Firmware Boot Manager
---------------------
identifier {fwbootmgr}
displayorder {bootmgr}
{d10304b6-5db7-11e4-bf1c-806e6f6e6963
{d10304b1-5db7-11e4-bf1c-806e6f6e6963
{d10304b2-5db7-11e4-bf1c-806e6f6e6963
{d10304b4-5db7-11e4-bf1c-806e6f6e6963
{d10304b3-5db7-11e4-bf1c-806e6f6e6963
{d10304b5-5db7-11e4-bf1c-806e6f6e6963
timeout 0
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-gb
inherit {globalsettings}
default {current}
resumeobject {4496c237-5dd0-11e4-be46-f1ba631dfb0b
displayorder {current}
toolsdisplayorder {memdiag}
timeout 30
Firmware Application (101fffff)
-------------------------------
identifier {d10304ae-5db7-11e4-bf1c-806e6f6e6963
description Setup
Firmware Application (101fffff)
-------------------------------
identifier {d10304af-5db7-11e4-bf1c-806e6f6e6963
description Boot Menu
Firmware Application (101fffff)
-------------------------------
identifier {d10304b0-5db7-11e4-bf1c-806e6f6e6963
description Recovery
Firmware Application (101fffff)
-------------------------------
identifier {d10304b1-5db7-11e4-bf1c-806e6f6e6963
description SATA HDD:
Firmware Application (101fffff)
-------------------------------
identifier {d10304b2-5db7-11e4-bf1c-806e6f6e6963
description USB CD:
Firmware Application (101fffff)
-------------------------------
identifier {d10304b3-5db7-11e4-bf1c-806e6f6e6963
description USB FDD:
Firmware Application (101fffff)
-------------------------------
identifier {d10304b4-5db7-11e4-bf1c-806e6f6e6963
description USB HDD:
Firmware Application (101fffff)
-------------------------------
identifier {d10304b5-5db7-11e4-bf1c-806e6f6e6963
description NETWORK:
Firmware Application (101fffff)
-------------------------------
identifier {d10304b6-5db7-11e4-bf1c-806e6f6e6963
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.efi
description Windows 8.1
locale en-gb
inherit {bootloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \Windows
resumeobject {4496c237-5dd0-11e4-be46-f1ba631dfb0b
nx OptIn
bootmenupolicy Standard
detecthal Yes
Resume from Hibernate
---------------------
identifier {4496c237-5dd0-11e4-be46-f1ba631dfb0b
device partition=C:
path \Windows\system32\winresume.efi
description Windows Resume Application
locale en-gb
inherit {resumeloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
filedevice partition=C:
filepath \hiberfil.sys
bootmenupolicy Standard
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\memtest.efi
description Windows Memory Diagnostic
locale en-gb
inherit {globalsettings}
badmemoryaccess Yes
EMS Settings
------------
identifier {emssettings}
bootems No
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
RAM Defects
-----------
identifier {badmemory}
badmemorylist 0x10007
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}
Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
I also enabled Fast Bios and ACHI Mode in my BIOS [along with enabling Secure Boot on UEFI mode], as well as tried to clear TPM and reinitialize it, but that didn't change anything. And thanks to your posts I had a look to C:\Windows\System32\Recovery\ReAgent.xml
but it does not seem to be populated with the any GUIDs:
<?xml version='1.0' encoding='utf-8'?>
<WindowsRE version="2.0">
<WinreBCD id="{24b2af92-fddf-11e1-bfa1-001377e67dbe}"/>
<WinreLocation path="\Recovery\WindowsRE" id="0" offset="254619418624" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
<ImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}"/>
<PBRImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
<PBRCustomImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
<InstallState state="1"/>
<OsInstallAvailable state="0"/>
<CustomImageAvailable state="0"/>
<IsAutoRepairOn state="1"/>
<WinREStaged state="0"/>
<OperationParam path=""/>
<OsBuildVersion path="9600.16384.amd64fre.winblue_rtm.130821-1623"/>
<OemTool state="0"/>
<IsServer state="0"/>
<DownlevelWinreLocation path="\Recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
<IsWimBoot state="0"/>
<ScheduledOperation state="5"/>
</WindowsRE>
Nevertheless I have a ReAgent_Merged.xml1 file in that same folder, which contains:
<?xml version='1.0' encoding='utf-8'?>
<WindowsRE version="1.0">
<WinreBCD id="{24b2af8c-fddf-11e1-bfa1-001377e67dbe}"/>
<WinreLocation path="\Recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
<ImageLocation path="\recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
<OsInstallLocation path="\RecoveryImage" id="0" offset="231720616448" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}" index="1"/>
<CustomImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
<InstallState state="1"/>
<OsInstallAvailable state="1"/>
<CustomImageAvailable state="0"/>
<IsAutoRepairOn state="1"/>
<WinREStaged state="0"/>
<OperationParam path=""/>
<OsBuildVersion path="9200.16384.amd64fre.win8_rtm.120725-1247"/>
<OemTool state="0"/>
<BootKey state="0"/>
<IsServer state="0"/>
<ScheduledOperation state="4"/>
</WindowsRE>
So I'm stuck, and any pointer would be greatly appreciated. :-/
Cheers,
Kwansetsu
-
Edited by
Kwansetsu
Thursday, October 30, 2014 4:11 PM